FORM Lighting Jeep JL/JT LED Sidemarkers are the perfect way to give your Jeep an upgrade in styling and appearance. The following installation guide will provide you with detailed instructions on how to install FORM Lighting Jeep JL/JT LED Sidemarkers on your Jeep. Check out our installation video, or continue reading for step-by-step instructions below!
Table of Contents
Installation Video
Installation Tools
- 8mm Socket
- 10mm Socket
- T20 Torx Bit
Mounting Instructions
Step 1 - Remove Fender Liner
Remove two (2) plastic clips from the front of the fender liner.
Now pull down on the fender to access the back of your sidemarker.
Step 2 - Removing the Factory Lamp
Using a T20 Torx bit, remove the screw closest to the outside of the vehicle. This holds your sidemarker to the entire light assembly.
Next, use a pic tool to disconnect the harness before fully removing your factory side marker.
Tip: We left the T20 screwdriver attached to the bolt to help make our installation easier.
Step 3 - Install Your New Light
Simply reverse the steps we used to take it apart, plug in the new lamp to the factory connector, and check for functionality.
Then, tighten that T20 Torx screw, and reinstall the fender liner.
This completes the installation. Now enjoy your new FORM Lighting Jeep LED Sidemarkers!
Questions About the Installation?
If you have any questions or issues installing Form Lighting's Jeep JL/JT LED Side Markers for your vehicle, please contact us for further assistance.
Where Can I Buy Form Lighting Jeep JL/JT LED Side Markers?
If you’re ready to upgrade your vehicle with Form Lighting's Jeep JL/JT LED Side Markers, you can purchase them by clicking here, or use our dealer locator to find a dealer near you.
Want to know more about Form Lighting products? Visit FormLights.com and subscribe to our newsletter for new product releases and more!
This Installation Guide is for the following SKU: FL0061, FL0062